Commit 99835e09 authored by André Valentin's avatar André Valentin Committed by John Crispin

ath79: add support for ZyXEL NBG6716

Attention: Kernel partition size has been enlarged to 4MB.
To switch, you must update to latest ar71xx-nand snapshort and flash the
sysupgrade-4M-Kernel.bin:

zcat openwrt-ath79-nand-zyxel_nbg6716-squashfs-sysupgrade-4M-Kernel.bin | mtd -r -e ubi write - firmware; reboot -f
You will end up with a fresh config if you do not inject config into the image.

The NBG6716 may come with 128MB or 256MB NAND. ar71xx was able to use all, but
ath79 can only use the first 128MB. Therefore the complete NAND needs to be
overwritten. If not, the old UBI may make problems and lead to reboot loop.

Access the real u-boot shell:
ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
When the device is starting up, the user can enter the the loader shell
by simply pressing a key within the 3 seconds once the following string
appears on the serial console:

|   Hit any key to stop autoboot:  3

The user is then dropped to a locked shell.

|NBG6716> HELP
|ATEN    x[,y]     set BootExtension Debug Flag (y=password)
|ATSE    x         show the seed of password generator
|ATSH              dump manufacturer related data in ROM
|ATRT    [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
|ATGO              boot up whole system
|ATUR    x         upgrade RAS image (filename)
|NBG6716>

In order to escape/unlock a password challenge has to be passed.
Note: the value is dynamic! you have to calculate your own!

First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
to get the challange value/seed.

|NBG6716> ATSE NBG6716
|012345678901

This seed/value can be converted to the password with the help of this
bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):

- tool.sh -
ror32() {
  echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
}
v="0x$1"
a="0x${v:2:6}"
b=$(( $a + 0x10F0A563))
c=$(( 0x${v:12:14} & 7 ))
p=$(( $(ror32 $b $c) ^ $a ))
printf "ATEN 1,%X\n" $p
- end of tool.sh -

|# bash ./tool.sh 012345678901
|
|ATEN 1,879C711

copy and paste the result into the shell to unlock zloader.

|NBG6716> ATEN 1,0046B0017430

If the entered code was correct the shell will change to
use the ATGU command to enter the real u-boot shell.

|NBG6716> ATGU
|NBG6716#
Signed-off-by: default avatarAndré Valentin <avalentin@marcant.net>
parent 353ecbbf
......@@ -304,6 +304,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "3:lan:1" "4:lan:2"
;;
zyxel,nbg6716)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
......@@ -443,6 +447,10 @@ ath79_setup_macs()
wd,mynet-wifi-rangeextender)
lan_mac=$(nvram get et0macaddr)
;;
zyxel,nbg6716)
lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
......
......@@ -47,6 +47,10 @@ case "$FIRMWARE" in
caldata_extract "radiocfg" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
;;
zyxel,nbg6716)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
;;
*)
caldata_die "board $board is not supported yet"
;;
......
......@@ -113,6 +113,10 @@ case "$FIRMWARE" in
ubnt,unifiac-pro)
caldata_extract "EEPROM" 0x5000 0x844
;;
zyxel,nbg6716)
caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
......
......@@ -15,7 +15,8 @@ migrate_wifi_path() {
case "$board" in
tplink,archer-c7-v1|\
tplink,archer-c7-v2)
tplink,archer-c7-v2|\
zyxel,nbg6716)
path="pci0000:00/0000:00:00.0"
WIFI_PATH_CHANGED=1
;;
......
......@@ -51,6 +51,9 @@ platform_do_upgrade() {
ubnt,routerstation-pro)
echo "Sysupgrade disabled due bug FS#2428"
;;
zyxel,nbg6716)
nand_do_upgrade "$1"
;;
*)
default_do_upgrade "$1"
;;
......
......@@ -178,6 +178,24 @@
};
};
nand: nand@1b800200 {
compatible = "qca,ar934x-nand";
reg = <0x1b800200 0xb8>;
interrupts = <21>;
interrupt-parent = <&miscintc>;
resets = <&rst 14>;
reset-names = "nand";
nand-ecc-mode = "hw";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gmac: gmac@18070000 {
compatible = "qca,qca9550-gmac";
reg = <0x18070000 0x58>;
......
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "zyxel,nbg6716", "qca,qca9558";
model = "ZyXEL NBG6716";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: power {
label = "nbg6716:white:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "nbg6716:white:internet";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
usb1 {
label = "nbg6716:white:usb1";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port0>;
};
usb2 {
label = "nbg6716:white:usb2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port1>;
};
wifi2 {
label = "nbg6716:white:wifi2";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5 {
label = "nbg6716:white:wifi5";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
label = "nbg6716:white:wps";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wifi_button {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb1 {
label = "USB1 eject button";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
usb2 {
label = "USB2 eject button";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&gpio {
gpio_usb_power {
gpio-hog;
gpios = <16 0>;
output-high;
line-name = "nbg6716:power:usb";
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
uboot_env: partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
art: partition@50000 {
label = "art";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
label = "nbu";
reg = <0x060000 0xfa0000>;
};
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "zyxel_rfsd";
reg = <0x0 0x200000>;
};
partition@200000 {
label = "romd";
reg = <0x200000 0x200000>;
};
partition@400000 {
label = "header";
reg = <0x400000 0x100000>;
};
firmware@500000 {
label = "firmware";
reg = <0x500000 0x7b00000>;
};
partition@500000 {
label = "kernel";
reg = <0x500000 0x400000>;
};
partition@900000 {
label = "ubi";
reg = <0x900000 0x7700000>;
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <17>;
phy-mode = "rgmii-id";
};
switch0@1f {
compatible = "qca,ar8327";
reg = <0x1f>;
qca,ar8327-initvals = <
0x04 0x87600000 /* PORT0 PAD MODE CTRL */
0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
0x50 0xffb7ffb7 /* LED_CTRL0 */
0x54 0xffb7ffb7 /* LED_CTRL1 */
0x58 0xffb7ffb7 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&mdio1 {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "sgmii";
};
};
&eth0 {
status = "okay";
pll-data = <0xa6000000 0x00000101 0x00001616>;
phy-handle = <&phy0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001616>;
phy-handle = <&phy1>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gpio {
status = "okay";
};
&wmac {
status = "okay";
};
&pcie1 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
};
};
&usb_phy0 {
status = "okay";
};
&usb_phy1 {
status = "okay";
};
&usb0 {
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb1 {
status = "okay";
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
# attention: only zlib compression is allowed for the boot fs
define Build/zyxel-buildkerneljffs
rm -rf $(KDIR_TMP)/zyxelnbg6716
mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
--big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
-o $@ \
-d $(KDIR_TMP)/zyxelnbg6716/image
rm -rf $(KDIR_TMP)/zyxelnbg6716
endef
define Build/zyxel-factory
let \
maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
let size="$$(stat -c%s $@)"; \
if [ $$size -lt $$maxsize ]; then \
$(STAGING_DIR_HOST)/bin/mkrasimage \
-b $(RAS_BOARD) \
-v $(RAS_VERSION) \
-r $@ \
-s $$maxsize \
-o $@.new \
-l 131072 \
&& mv $@.new $@ ; \
fi
endef
define Device/glinet_gl-ar300m-nand
ATH_SOC := qca9531
DEVICE_VENDOR := GL.iNet
......@@ -13,3 +41,24 @@ define Device/glinet_gl-ar300m-nand
IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
endef
TARGET_DEVICES += glinet_gl-ar300m-nand
define Device/zyxel_nbg6716
ATH_SOC := qca9558
DEVICE_VENDOR := ZyXEL
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
RAS_BOARD := NBG6716
RAS_ROOTFS_SIZE := 29696k
RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
KERNEL_SIZE := 4096k
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL := kernel-bin | append-dtb | uImage none | \
zyxel-buildkerneljffs | check-size 4096k
IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory
UBINIZE_OPTS := -E 5
endef
TARGET_DEVICES += zyxel_nbg6716
DEVICE_VARS += RAS_ROOTFS_SIZE RAS_BOARD RAS_VERSION
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment