Commit 98d9158d authored by Adrian Schmutzler's avatar Adrian Schmutzler

ramips: mt7620: use flash location for wan_mac in 02_network

This uses the flash locations instead of eth0 MAC address to
calculate MAC address increments for WAN.

The change will make the MAC address setup of a particular device
more obvious and removes the dependency of 02_network on the eth0
initialization.
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
parent 38866f27
......@@ -222,28 +222,19 @@ ramips_setup_macs()
case $board in
aigale,ai-br100|\
alfa-network,ac1200rm|\
asus,rt-ac51u|\
asus,rt-n12p|\
asus,rt-n14u|\
bdcom,wap2100-sk|\
dlink,dir-810l|\
edimax,ew-7478apc|\
fon,fon2601|\
head-weblink,hdrm200|\
nexx,wt3020-4m|\
nexx,wt3020-8m|\
phicomm,psg1208|\
phicomm,psg1218a|\
phicomm,psg1218b|\
planex,db-wrt01|\
planex,mzk-750dhp|\
sanlinking,d240|\
tplink,archer-c2-v1|\
tplink,archer-c20-v1|\
tplink,archer-c20i|\
tplink,archer-c50-v1|\
tplink,archer-mr200|\
vonets,var11n-300|\
wrtnode,wrtnode|\
youku,yk1|\
......@@ -254,7 +245,13 @@ ramips_setup_macs()
zbtlink,zbt-we826-32m|\
zbtlink,zbt-we826-e|\
zbtlink,zbt-wr8305rt)
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
;;
alfa-network,ac1200rm|\
dlink,dir-810l|\
phicomm,psg1218a|\
phicomm,psg1218b)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
;;
alfa-network,r36m-e4g|\
zbtlink,zbt-we1026-h-32m)
......@@ -280,7 +277,7 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
;;
edimax,br-6478ac-v2)
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 2)
;;
engenius,esr600)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
......@@ -289,7 +286,7 @@ ramips_setup_macs()
glinet,gl-mt300a|\
glinet,gl-mt300n|\
glinet,gl-mt750)
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4000)" 1)
label_mac=$(mtd_get_mac_binary factory 0x4)
;;
hiwifi,hc5661|\
......@@ -313,6 +310,13 @@ ramips_setup_macs()
linksys,e1700)
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
tplink,archer-c2-v1|\
tplink,archer-c20-v1|\
tplink,archer-c20i|\
tplink,archer-c50-v1|\
tplink,archer-mr200)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1)
;;
zbtlink,zbt-we1026-5g-16m)
label_mac=$(mtd_get_mac_binary factory 0x4)
;;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment