Commit 69fff339 authored by Roman Bazalevsky's avatar Roman Bazalevsky Committed by Adrian Schmutzler

sunxi: add support for FriendlyARM Nano PI NEO Air dev board

Hardware:

  Allwinner H3 upto 1.2GHz
  512MB DDR3 RAM
  8GB on-board eMMC - mountable, can be used as boot with custom boot.scr
  microSD-card slot
  WiFi 802.11n (AP6212A) - working
  Bluetooth (AP6212A) - not working for now
  Micro-USB OTG + 2*USB headers
  UART 3.3V - working
  GPIO/I2C/SPI 2.54mm headers

Standard sunxi SD-card installation procedure - copy image to SD card,
insert in into slot and boot. First time you will need UART adapter to
enable on-board wireless (or just build custom image with enabled WiFi).

To boot from eMMC:

  - boot from SD
  - copy SD image to emmc (dd bs=... if=.... of=/dev/mmcblk2)
  - mount eMMC boot partition and replace boot script on it
  - unmount, reboot

To use i2c, spi and more uarts - replace dtb on boot partition with
fixed one (use dtc or fdt-tools).
Signed-off-by: default avatarRoman Bazalevsky <rvb@rvb.name>
[rebase onto device name consolidation patches]
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
parent 3a4ad758
......@@ -138,6 +138,12 @@ define U-Boot/nanopi_m1_plus
BUILD_DEVICES:=friendlyarm_nanopi-m1-plus
endef
define U-Boot/nanopi_neo_air
BUILD_SUBTARGET:=cortexa7
NAME:=U-Boot for NanoPi NEO Air (H3)
BUILD_DEVICES:=friendlyarm_nanopi-neo-air
endef
define U-Boot/nanopi_neo
BUILD_SUBTARGET:=cortexa7
NAME:=U-Boot for NanoPi NEO (H3)
......@@ -274,6 +280,7 @@ UBOOT_TARGETS := \
Lamobo_R1 \
nanopi_m1_plus \
nanopi_neo \
nanopi_neo_air \
nanopi_neo_plus2 \
nanopi_neo2 \
orangepi_zero \
......
......@@ -160,6 +160,18 @@ endef
TARGET_DEVICES += friendlyarm_nanopi-neo
define Device/friendlyarm_nanopi-neo-air
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO Air
DEVICE_PACKAGES := kmod-rtc-sunxi \
kmod-leds-gpio kmod-ledtrig-heartbeat \
kmod-brcmfmac brcmfmac-firmware-43430-sdio wpad-basic
SUNXI_SOC := sun8i-h3
endef
TARGET_DEVICES += friendlyarm_nanopi-neo-air
define Device/xunlong_orangepi-one
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi One
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment