Commit 2b1baf9b authored by Adrian Schmutzler's avatar Adrian Schmutzler Committed by David Bauer

ath79: remove redundant mtd-mac-address for wmac

For several devices, wmac MAC address is set from art 0x1002
explicitly by using mtd-mac-address although mtd-cal-data is
pulled from art 0x1000.

With the MAC address in 0x1002, the driver should automatically
use it when reading caldata from 0x1000. Thus, remove the
redundant mtd-mac-address for those devices.
Signed-off-by: default avatarAdrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: default avatarJeff Kletsky <git-commits@allycomm.com>
Tested-by: default avatarKarl Palsson <karlp@etactica.com>
parent 6f2e1b74
......@@ -132,5 +132,4 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
......@@ -116,5 +116,4 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
......@@ -127,5 +127,4 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
......@@ -139,7 +139,6 @@
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
&eth0 {
......
......@@ -220,5 +220,4 @@
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
......@@ -143,7 +143,6 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
&pinmux {
......
......@@ -141,5 +141,4 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
......@@ -133,5 +133,4 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
......@@ -173,5 +173,4 @@
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment