Commit 13937a16 authored by David Bauer's avatar David Bauer

ramips: fix network setup for various NETGEAR boards

There are currently the following issues present for the Netgear R6220,
R6350 and WNDR3700 v5:

 - LAN and WAN MAC-addresses are inverted
 - WAN MAC-address is off. It are +2 compared to the LAN MAC-address
   (R6350 only)
 - Switchport order is inverted in LuCi

This commit fixes both these issues by assigning correct MAC-addresses
to LAN and WAN interfaces and defining the switchports with the correct
labels.
Signed-off-by: default avatarDavid Bauer <mail@david-bauer.net>
parent fa46c9b2
......@@ -66,9 +66,6 @@ ramips_setup_interfaces()
mercury,mac1200r-v2|\
mqmaker,witi|\
mtc,wr1201|\
netgear,r6220|\
netgear,r6350|\
netgear,wndr3700-v5|\
netis,wf-2881|\
nixcore,x1-16m|\
nixcore,x1-8m|\
......@@ -396,7 +393,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
;;
netgear,r6120)
netgear,r6120|\
netgear,r6220|\
netgear,r6350|\
netgear,wndr3700-v5)
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
;;
......@@ -592,7 +592,8 @@ ramips_setup_macs()
edimax,br-6475nd)
wan_mac=$(mtd_get_mac_binary devdata 0x7)
;;
edimax,br-6478ac-v2)
edimax,br-6478ac-v2|\
netgear,r6350)
wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
elecom,wrc-1167ghbk2-s|\
......@@ -640,12 +641,6 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_binary factory_info 0xd)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
netgear,r6220|\
netgear,r6350|\
netgear,wndr3700-v5)
wan_mac=$(mtd_get_mac_binary factory 0x4)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
ohyeah,oy-0001|\
phicomm,k2g|\
skylab,skw92a)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment